Phone:
+86-13819135332
come together for the greater good
Model | SD302A-1200 | SD302A-1400 |
Rated Pressure (bar) | 70 | 80 |
Max. Pressure (bar) | 100 | 110 |
Rated Flow (L/min) | 5.5 | 5.5 |
Max. Flow (L/min) | 6.5 | 6.5 |
Motor Power (W) | 1200 | 1400 |
Volt/Freq. | AC 220-240V, 50/60HZ, AC 120-127V, 50/60HZ | |
Motor Type | Carbon brush motor | |
Product Size (mm) | 313*225*434 | |
Carton Size (mm) | 290*265*413 | |
N.W/G.W (kg) | 5.1/5.8 | 5.3/6.1 |
| Standard accessories: . Metal gun with adjustable spray nozzle . 5m power cord with plug . 5m high pressure hose . Water inlet quick connector .Built-in detergent tank and cleaning needle | Optional accessories: . Turbo nozzle . Fixed brush . Rotary brush . Patio cleaner . Water inlet hose . Water inlet hose connector |
How to Solve Your Customer's Problems
Q1: The machine does not start when it is energized?
A:Reason: Air is not excluded before the machine is used.
Follow the steps to solve it:
1. Connect the intake assembly first;
2. Turn on the machine and exhaust the air;
3. Connect the outlet assembly;
4. Pull the trigger and restart the machine.
Q2: Machine does not absorb water after starting?
A: Check whether the joint is leaking; Adjusting the height of the difference between the machine and the water surface of the source should not exceed 50 cm.
Q3: No water coming out after starting the machine?
A: Cleaning water intake nuts; make sure the tap is fully open and that the pipe is in an uncoiled state.
Q4: The pressure of machine effluent is very low?
A: Make sure the tap is fully open and the water pipe is controlled within 16 meters.
Q5: Tipping operation caused by machine start-up?
A: Reason: Intensively controlled blockage leads to an increase in machine power load. Put a needle through the hole of the gun.
Model | SD302A-1200 | SD302A-1400 |
Rated Pressure (bar) | 70 | 80 |
Max. Pressure (bar) | 100 | 110 |
Rated Flow (L/min) | 5.5 | 5.5 |
Max. Flow (L/min) | 6.5 | 6.5 |
Motor Power (W) | 1200 | 1400 |
Volt/Freq. | AC 220-240V, 50/60HZ, AC 120-127V, 50/60HZ | |
Motor Type | Carbon brush motor | |
Product Size (mm) | 313*225*434 | |
Carton Size (mm) | 290*265*413 | |
N.W/G.W (kg) | 5.1/5.8 | 5.3/6.1 |
| Standard accessories: . Metal gun with adjustable spray nozzle . 5m power cord with plug . 5m high pressure hose . Water inlet quick connector .Built-in detergent tank and cleaning needle | Optional accessories: . Turbo nozzle . Fixed brush . Rotary brush . Patio cleaner . Water inlet hose . Water inlet hose connector |
How to Solve Your Customer's Problems
Q1: The machine does not start when it is energized?
A:Reason: Air is not excluded before the machine is used.
Follow the steps to solve it:
1. Connect the intake assembly first;
2. Turn on the machine and exhaust the air;
3. Connect the outlet assembly;
4. Pull the trigger and restart the machine.
Q2: Machine does not absorb water after starting?
A: Check whether the joint is leaking; Adjusting the height of the difference between the machine and the water surface of the source should not exceed 50 cm.
Q3: No water coming out after starting the machine?
A: Cleaning water intake nuts; make sure the tap is fully open and that the pipe is in an uncoiled state.
Q4: The pressure of machine effluent is very low?
A: Make sure the tap is fully open and the water pipe is controlled within 16 meters.
Q5: Tipping operation caused by machine start-up?
A: Reason: Intensively controlled blockage leads to an increase in machine power load. Put a needle through the hole of the gun.